![background image](http://html1.mh-extra.com/html/vtech/i915/i915_technical-reference-booklet_1054436035.webp)
35
Install DDR DIMMs
Please follow the following step to install DDR DIMMs.
1. Locate the DDR DIMM sockets.
2. Holding the DDR DIMM by the edges, remove it from its antistatic package.
3. Make sure the clips at either end of the socket are pushed away from the
socket.
4. Position the DDR DIMM above the socket. Align the two small notches in
the bottom edge of the DDR DIMM with the keys in the socket.
5. Insert the bottom edge of the DDR DIMM into the socket.
6. When the DDR DIMM is seated, push down on the top edge of the DDR
DIMM untilthe retaining clips at the ends of the socket snap into place.
Make sure the clips are firmly in place.
Please turn off system before installing and removing any
device, otherwise you’ll cause the system damage.
Clip
Clip
DDR DIMM
DDR DIMM Socket
Notch
Install DDR DIMMs