6
BATTERY REMOVAL AND INSTALLATION
NOTE:
For best performance, remove the
factory-installed battery from the
Go! Go! Cory
Carson
®
Cory Learning Watch
™
and use a
new battery.
1. Find the battery cover located on the back
of the unit, use a screwdriver to loosen the
screw and then open the battery cover.
2. Remove the old battery.
3. Install 1 new CR2450 button battery
following the diagram inside the
battery cover.
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
•
Use one CR2450 lithium coin battery only for this toy. Do not
use a rechargeable lithium ion battery LIR2450. This toy is not
compatible with LIR2450.
•
The coin battery used with this product should be kept away from
small children who might still put things in their mouths. If the coin
battery is swallowed, consult a doctor immediately.
•
Insert the coin battery with the correct polarity (+ and -).
•
Do not use a damaged coin battery.
•
Do not short-circuit the coin battery terminals.
•
Remove the exhausted coin battery from the toy.
•
Remove the coin battery during long periods of non-use.
•
Do not dispose of the coin battery in fire.
•
Do not charge a non-rechargeable coin battery.
