15
MATH LAB™
BATTERIES
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a
coin or screwdriver to open the battery cover. Insert 3
new “AA” (UM-3/ LR6) batteries following the diagram
inside the battery compartment.
3. Replace the battery cover and tighten the screw to
secure the battery cover.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the learning toy when it will not be
used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• Do not short circuit the supply terminals.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
AUTOMATIC SHUT-OFF
To preserve battery life, the Math Lab™
Math Lab™
Math Lab™
Math Lab™
Math Lab™ learning toy will turn off automatically
after 4 minutes. Turn the unit on again by pressing the ON button.
Note: If for some reason the program/activity stops working, then please follow
these steps:
1. Please turn the unit off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit on. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services Department at 1-800-
521-2010 in the U.S., 1-800-267-7377 in Canada, or 01235-546810 in the U.K.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING: All packing materials such as tape, plastic sheets, wire ties and tags
are not part of this toy and should be discarded for your child’s safety
A
10/8/01, 2:01 PM
15
