1
ES1500A ADDITIONAL HANDSET REGISTRATION INSTRUCTIONS
This additional handset has been designed to operate with the ES1510A telephone system. Please refer to your
ES1510A user’s manual for instructions on general functionality.
Package Contents
1 ES1500A handset
1 Charger
1 AC power adaptor
2 NiMH rechargeable batteries (for handset)
Setting up your ES1500A Additional Handset
The position in which you place the ES1500A charger could have an effect on the range and performance of your
ES1500A.
•
•
•
•
Plug the mains power cable into the charger base, plug the other end into the mains power wall socket and switch
the power on.
NOTE
Ensure the power cord is fed through the slot on the charger so the unit sits flush with the desk.
2. To fit the NiMH battery into the handset, slide open the battery compartment cover. Place the supplied
rechargeable battery in the battery compartment, with the battery connector plugged in, as shown. Slide the
battery compartment cover back on until it clicks into place.
1.
3. Place the handset on the charger to charge for at least 16 hours. A beep sounds when the handset is properly
placed on the base or charger.
Mains power wall socket
Mains power cable