VTech ErisTerminal VSP610A ErisTerminal VSP608A, Administrator And Provisioning Manual

Page: 21 / 155

Configuration Using the Phone Menus 21
Back to Contents
VSP610A Administrator and Provisioning Manual
To set PPPoE:
1. From the
Network setting
menu, press

or

to highlight
IPv4
(which must be in
PPPoE
mode), and then press MENU/SELECT .
2. Highlight
Set PPPoE
and then press SELECT . The
Set PPPoE
menu appears.
3. On the
Set PPPoE
menu, enter the PPPoE account Username.
4. Press

and then press if you are required to enter a PPPoE account password.
5. Enter a password, if you are required to enter a PPPoE password.
6. Press .
To set the VLAN ID for the VSP610A:
1. From the
Network setting
menu, press

or

to highlight
VLAN ID
, and then
press MENU/SELECT .
2. On the
VLAN ID
menu, press MENU/SELECT to enable or disable the WAN Port.
3. Press

and enter the WAN VID. Use the dial pad and the soft key to enter
characters. The valid range is 0 to 4095.
4. Press

and enter the WAN priority. The valid range is 0 to 7.
5. Press .

SAVE
BACK SET
0
VLAN ID
VID:
Disabled
WAN port:
BACKSP
SAVE
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299