30
5.13 Power outage Setting
The feature is preset to
AUTO
. You may also manually change the power fail back-
up setting.
Press
MenU
in idle mode to enter the main menu.
Press
or
to scroll to
HS SETTINGS
.
Press
OK
and
or
to scroll to
POWER OUTAGE
.
Press
OK
and
or
to select
AUTO
,
MANUAL
or
OFF
.
Press
OK
to save your selection. You hear a confirmation tone.
Notes:
If
OFF
is selected, Power Fail Back-Up mode will not be enabled.
If
AUTO
is selected, the registered handset(s) will display
Put on BS to power
outage
for about
2 seconds, followed by
PWR OUTAGE NO PICK UP
when mains power
interruption occurs. Place the handset with sufficient battery power (usually not
lower than
level 2
) onto the main base unit to activate Power Fail Back-Up and
start up the base. If handset is already on the main base unit it will automatically
activate the Power Fail Back-Up mode (if it has sufficient battery power) and
start up the base. If
AUTO
is selected and handset is not returned to base unit
within approximately 2 minutes the handset will temporarily revert to Manual
mode to converse battery power.
If
MANUAL
is selected, the registered handset(s) will display
TO PWR UP HOLD
OFF KEY
when mains power interruption occurs. Press and hold
and then
place the handset onto the main base unit to activate the Power Fail Back-Up
mode and start up the base.
.
2.
3.
4.
5.
•
•
•
