VTech CS5121 User Manual Download Page 36

Page: 36 / 69

www.vtechphones.com

Answering system

If you have caller

ID servce the

clock wll be set

automatcally wth

ncomng calls,

but you wll need

to make sure the

year s correct.
Press and hold

SKIP

REPEAT

whle settng

the mnutes or

year to advance

or decrease by

ncrements of ten.

•

Activate the answering system

The answerng system must be turned on to answer and record messages.

If the answerng system s turned on, the

ANS ON/OFF

lght wll be on. Press

ANS ON/OFF

to turn the answerng system off or on.

Set the clock

Before playng each message, the answerng system announces the day and

tme of the message receved. Before usng the answerng system, set the day,

tme and year, so that messages are dated correctly. If the clock s not set before

new messages are recorded, the system wll announce

“Time and day not set.”

before each message s played to remnd you to set the clock.

Press

CLOCK

. The system announces the clock settng (e.g. day, tme and

year), then announces:

“To set the clock, press

CLOCK.”

Press

CLOCK

. The system announces the current day.

Press

/SKIP

or /

REPEAT

untl the system announces the correct day, then

press

CLOCK

. The system announces the current hour.

Press

/SKIP

or /

REPEAT

untl the system announces the correct hour, then

press

CLOCK

. The system announces the current mnute.

Press

/SKIP

or /

REPEAT

untl the system announces the correct mnute,

then press

CLOCK

. The system announces the current year.

Press

/SKIP

or /

REPEAT

untl the system announces the correct year, then

press

CLOCK

. The system announces the current clock settng and exts the

clock menu.

Summary of Contents for CS5121






































































Search results

Summary of Contents for CS5121

Reviews:

Related manuals for CS5121

Brands by name

Popular brands

VTech CS5121, User Manual

Search results

Summary of Contents for CS5121

Reviews:

Related manuals for CS5121

Brands by name

Popular brands