5
4
NOTE: If for any reason the program/activity stops working, please follow
these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada, and a service
representative will be happy to help you.
TO BEGIN PLAY
1.
To turn the unit ON, slide the ON/OFF/
MODE SELECTOR SWITCH to the
TALKING MODE (
) or the MELODY
MODE(
) position.
2.
To adjust the volume, slide the VOLUME
CONTROL SWITCH located on the bottom
of the unit to the LOW VOLUME position
(
) or the HIGH VOLUME position (
).
3.
To turn the unit OFF, slide the ON/OFF/
MODE SELECTOR SWITCH to the OFF
(
•
) position.
Note: For the best movement, please use on a hard and flat surface.
Note: To preserve battery life, the VTech
®
Count 'n Go
™
Snail learning
toy will automatically power-down after several minutes without
input. Press the button or turn the disks to turn the unit on again.
ACTIVITIES
A. TALKING MODE
1.
Slide the ON/OFF/MODE SELECTOR
SWITCH to the TALKING MODE (
)
position. You will hear "I'm a silly snail"
and a giggle sound effect. The lights
will flash randomly with the sound.
2.
Press the LADYBUG button on the
snail's back or turn the two spinning
disks to line up two images. You will
hear a random phrase, sound effect or
short tune. The lights will flash randomly
with the sounds, then the snail will run
forward and the two disks will spin.
B. MELODY MODE
1.
Slide the ON/OFF/MODE SELECTOR
SWITCH to the MELODY MODE (
)
position. You will hear "I'm a silly snail"
followed by a short tune. The lights will
flash randomly with the sounds.
PIN S
NAIL
I’m a silly snail!
I’m a silly snail!
Three sleepy
Bees!
