manualshive.com logo in svg

VTech CL6527A, User Manual

Share
Download
VTech CL6527A User Manual Download Page 76

76

SENSOR OPERATIONS

SENSOR MODE

You can choose LOCAL mode to receive alerts at the 
telephone system, or REMOTE - CALL mode to receive calls 
at other numbers you have specified. This allows you to get 
notified even when you are away from home. The preset 
sensor mode is LOCAL.

In REMOTE - CALL mode, when you receive the remote alert 
call, you will hear the alert message and then you can choose 
to listen to the sound in your house; or you can choose to 
speak through the handset to the visitor or intruder.

1.  Press 

 when the phone is not in use, and then 

press 

 /   

to scroll to

 SENSOR MODE

.

2.  Press 

 and then press 

 /   

 to scroll to  

LOCAL

 or 

REMOTE - CALL

.

        •  When 

REMOTE - CALL

 is chosen, and no  

           telephone number has been previously set, you             
           will be prompted to set the telephone numbers  
           for remote calls.

NOTES

•  In REMOTE - CALL mode, the stored telephone numbers will ring 

in sequence. If the first telephone number is busy or does not 

pick up the remote call, the telephone system will call the second 

telephone number, and so on.

Summary of Contents for CL6527A
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands