VTech CB 1733, User Manual, Page: 16 / 43

1 6
• Using the / soft keys,
scroll until 3. Ringer Tone/Vol is
highlighted
• Press ENTER
• Use the RING soft key to select
the Ringer Type (there are 4 ring
styles) and Vol soft key to select
the ringer volume (High, Low or
Off).
• Press SAVE to store your ringer
settings
• To exit programming mode at any
time, press OFF key .
FROM THE BASE
• The Base Unit ringer is controlled
independently, by a switch located
on the front, right hand side
(antenna side) of the Base.
• The Base ringer has (3) settings:
High, Low and Off.
HOLD
FROM THE HANDSET
•
Press the HOLD soft key to place
an active call on hold. Press the
TALK soft key or the PHONE key
to return to your call.
•
If an extension phone is activated
while the CB 1733 has a call on
HOLD, the CB 1733 will release
the call and turn itself OFF.
FROM THE BASE
•
During a Speakerphone call,
press HOLD on the Base Unit.
The red light (LED) buit into the
SPEAKERPHONE key, will flash
rapidly while your call is on hold.
•
Press either HOLD or
SPEAKERPHONE to return to
your call.
MUTE
FROM THE HANDSET
•
Press the MUTE soft key to dis-
able the Handset microphone
during an active call. Press the
TALK soft key or the PHONE key
to return to normal 2-way
conversation.
FROM THE BASE
•
During a Speakerphone call,
press MUTE to disable the Base
Unit microphone. The red light
(LED) buit into the MUTE key, will
glow.
• Press MUTE again to return to a
two-way conversation.
REDIAL WITH THE HANDSET
ON (OFF HOOK)
QUICK REFERENCE GUIDE