4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit and remote control are turned
OFF
.
2. Locate the battery cover on the bottom of the unit and remote control.
Use a screwdriver to loosen the screw.
3. First, install 6 new “AA” size (LR6/AM-3) batteries following the
diagram inside the battery box in the main unit. Then, install 2 new
“AA” size (LR6/AM-3) batteries following the diagram inside the
battery box in the remote control. (The use of new alkaline batteries
is recommended for maximum performance.)
4. Replace the battery cover and tighten the screw in the main unit and
remote control to secure it.
Note:
When the battery runs low, the toy will no longer respond. If this
happens, please replace the battery.
Getting St
ar
ted
Bronco the RC Triceratops
™
Remote Control
