30
Additional Information
Wall Mount (Optional)
Items included
The following is included to mount your baby unit:
x 2
x 2
Notes:
• Check for reception strength and camera angle of the baby unit before drilling the holes.
• The types of screws and plugs you need depend on the composition of the wall. You may
need to purchase the screws and plugs separately to mount your baby units.
1�
Use a pencil to mark two holes in parallel. Make sure they are the same
distance apart as the wall mount holes on the baby unit.
2�
Drill two holes in the wall (5.5 mm drill bit).
- OR -
If you drill the holes into an object other than a stud, insert the wall anchors into
the holes. Tap gently on the ends with a hammer until th
e wall anchors are flush
with the wall.
