Main
menu
Sub-
menu
Projection light
/
Turn on/off projection light
• Set timer to turn the projection light off.
• Set to auto turn on the projection light when baby unit detects sound. It will turn off after 15 minutes of
no sound detection. You can set
VOX sensitivity level
to detect sounds that exceed certain levels.
See
Sound sensitivity and sound activation
section.
Alert settings
• Set the parent unit to beep when the battery is low.
• Set the parent unit to beep when the link between the parent unit and the
baby unit is lost.
• Set the confirmation tone on or off when selecting an option in the
menus.
• Set the parent unit to beep when the baby unit detects sounds while in
Split
mode (For
BM4700N-2
only).
Temperature
/
• Turn on/off temperature alert tone.
• Set the parent unit to beeps whenever the room temperature detected by the
baby unit falls outside of the set temperature range.
• Set the minimum temperature.
• Set the maximum temperature.
• Set temperature display in Fahrenheit (
o
F) or Celsius (
o
C)
Sound activation - screen and audio
/
Turn on/off sound activation
• Set sound activation on or off.
• When it is on, and the baby unit detects no sound, the parent unit screen
stays off to save power. Once a sound is detected, the parent unit screen and
speaker turns on automatically, and you can see and hear your baby. The
parent unit will then turn off again after 50 seconds of no sound detection.
Note
• When the parent unit screen is off and it receives alerts, for example, link lost
between parent unit and baby unit, or battery is low, the parent unit screen
and speaker will turn on for 10 seconds.
VOX (Voice Activated Alert) Sensitivity
• You can set VOX sensitivity level to activate parent unit screen and sound
when baby unit detects sounds that exceed certain levels. See
Sound
sensitivity and sound activation
section.
10