VTech BM3800N User Manual Download Page 3

1. Follow all warnings and instructions marked on the

product.

2. Adult setup is required.

3. CAUTION:

 Do not install the baby unit at a height above 2

metres.

4.  This product is not a substitute for adult supervision of the 

infant. Supervising the infant is the parent’s or caregiver’s 

responsibility. This product could cease operating, and 

therefore you should not assume it will continue working 

properly for any given period of time. Further, this is not a 

medical device and should not be used as such. This product 

is intended to assist you in supervising your baby.

5. Do not use this product near water. For example, do not

use it next to a bath tub, wash bowl, kitchen sink, laundry

tub or swimming pool, or in a wet basement or shower.

6.  CAUTION:

 Use only the battery provided. There may be a risk

of explosion if a wrong type of battery is used for the parent 

unit. The battery cannot be subjected to high or low extreme 

temperature and low air pressure at high altitude during use, 

storage or transportation. Disposal of battery into fire or a hot 

oven, or mechanically crushing or cutting or the battery can 

result in an explosion. Leaving the battery in an extremely 

high temperature surrounding environment can result in an 

explosion or the leakage of flammable liquid of gas. Battery 

subjected to extremely low air pressure may result in an 

explosion or the leakage of flammable liquid or gas. Dispose of 

used battery according to the information in 

The RBRC sea

l.

7. Use only the adapters included with this product.

Incorrect adapter polarity or voltage can seriously damage

the product.

  

Power adapter information: 

Parent unit output: 5V DC 1A 

VTech Telecommunications Ltd.  

Model: VT05EAU05100

Baby unit output: 5V DC 

1

A. 

VTech Telecommunications Ltd. 

Model: VT05EAU05

10

  

Rechargeable battery information: 

Zhuhai Great Power Energy Co., Ltd. 

Li-ion battery, 3.6V, 2600mAh, 9.36Wh; 

Model: ICR18650-2.6Ah-3.6V-1S1P

8. The power adapters are intended to be correctly oriented

in a vertical or floor mount position. The prongs are not

designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

9. For pluggable equipment, the socket-outlet shall

be installed near the equipment and shall be easily

accessible.

10. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

11. Do not cut off the power adapters to replace them with

other plugs, as this causes a hazardous situation.

12. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

13. This product should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supply in your home,

consult your dealer or local power company.

14. Do not overload wall outlets or use an extension cord.
15. Do not place this product on an unstable table, shelf, stand

or other unstable surfaces.

16. This product should not be placed in any area where

proper ventilation is not provided. Slots and openings

in the back or bottom of this product are provided for

ventilation. To protect them from overheating, these

openings must not be blocked by placing the product 

on a soft surface such as a bed, sofa or rug. This product 

should never be placed near or over a radiator or heat 

register.

17. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of any

kind on the product.

18. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Opening or removing parts of the product other than

specified access doors may expose you to dangerous

voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

19. You should test the sound reception every time you turn

on the units or move one of the components.

20. Periodically examine all components for damage.
21. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset

the baby monitor periodically by powering off and then

powering on the units, and power off the baby monitor if

you will not use it for some time.

22. Children should be supervised to ensure that they do not

play with the product.

23. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their

safety.

SAVE THESE INSTRUCTIONS

Cautions

1. Use and store the product at a temperature between 0

o

C

and 40

o

C.

2. Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

3. Batteries should not be exposed to excessive heat such as

bright sunshine or fire.

4.

Warning—Strangulation Hazard—

Children have STRANGLED in cords. Keep this

cord out of the reach of children (more than 3 ft (0.9m)

away). Do not remove this tag.

5. Never place the baby unit(s) inside the baby’s crib or

playpen. Never cover the baby unit(s) or parent unit with

anything such as a towel or a blanket.

6. Other electronic products may cause interference with

your baby monitor. Try installing your baby monitor

as far away from these electronic devices as possible:

wireless routers, radios, cellular telephones, intercoms,

room monitors, televisions, personal computers,

kitchen appliances and cordless telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent 

research entity, led a multidisciplinary evaluation of the 

interference between portable wireless devices and 

implanted cardiac pacemakers. Supported by the U.S. Food 

and Drug Administration, WTR recommends to physicians 

that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned

ON.

WTR’s evaluation did not identify any risk to bystanders with 

pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF)

This VTech product complies with all standards regarding 

electromagnetic fields (EMF). If handled properly and 

according to the instructions in this user’s manual, the product 

is safe to be used based on scientific evidence available 

today.

Important safety instructions

The applied nameplate is located at the bottom of the baby 

unit’s base.

When using your equipment, basic safety precautions should 

always be followed to reduce the risk of fire, electric shock 

and injury, including the following:

3

Summary of Contents for BM3800N





























Reviews: