6
GETTING STARTED
BATTeRY INSTALLATION – ROCKeT
1.
Make sure the unit is turned
OFF
.
2.
Locate the battery cover on the
bottom of the rocket. Use a coin or
a screwdriver to loosen the screw.
3. Install two new “AAA” (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTeRY NOTICe
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
G
ET
TI
N
G S
TAR
TE
D
Summary of Contents for Blast-Off Space Station
Page 2: ......
