7
AlphaBit’s Letter Loop
™
- BATTERIES
BATTERY INSTALLATION
1.Make sure the unit is turned OFF.
2.Locate the battery cover on the back of the unit. Use a
coin or screwdriver to loosen the screw.
3.Install 3 new “AA” (UM-3/LR6) batteries following the
diagram inside the battery box. (The use of new alkaline
batteries is recommended for maximum performance.)
4.Replace the battery cover and tighten the screw to
secure the battery cover.
NOTE: Due to the scrolling mechanism, this product requires frequent battery
replacement. When the scrolling screen functions slowly, please replace with
a new set of batteries.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the learning toy when it will not be
used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are to be
used
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
BA
TTER
Y
INST
ALLA
TION
