Default settings are indicated by asterisks (*).
Setting
Options
Adjustable by:
Handset earpiece volume
1
,
2*
,
3
,
4
User and administrator
Ringer volume
Low
,
Medium*
,
High
User and administra
tor
Ringer tone
Tone 1*
,
Tone 2
,
Tone 3
Administrator only
Flash
1
(00ms),
2
(00ms),
3*
(600ms)
Administrator only
Voicemail voltage detection
Disable voicemail voltage detection
,
Periodic low voltage pulse detection method
,
Steady high voltage and periodic high voltage
pulse detection method
Administrator only
Ringer tone
There are ringer tone options.
To change the ringer tone:
Turn the telephone base over with the bottom side facing up.
Remove the mounting bracket if it is in desktop position. To remove
the mounting bracket, firmly push both tabs downward and pull up until they release from the grooves.
Slide the ringer tone switch to select the desired detented position using a narrow object such as a standard screwdriver.
Install the mounting bracket accordingly.
Flash
There are 3 flash duration options that can be programmed.
To change the flash duration:
Remove the faceplate and overlay if they are on the telephone base. Lift the handset, then press the recessed
PROGRAM
key.
The
MUTE
key flashes when in administrator mode.
Press
FLASH
and you hear beeps. Then press a dialing key,
1
(00ms),
2
(00ms) or
3
(600ms), to select the desired flash
duration. Press the recessed
PROGRAM
key again. You hear 3 rising beeps as confirmation.
.
2.
.
.
2.
Telephone settings
Ringer tone
switch
Mounting
bracket
