EN - 35
English
Flash
There are 3 flash duration options that can be
programmed.
To change the flash duration
1. Remove the faceplate and overlay if they
are on the telephone base. Then, press the
recessed
PROGRAM
key.
2. Press
FLASH
and you hear 3 beeps. Then,
press a dialing key,
1
(100ms),
2
(300ms) or
3
(600ms), to select the desired flash duration.
You hear 3 rising beeps as confirmation.
RF transmission power
There are 3 RF transmission power options on
the telephone base that can be programmed.
To change the RF transmission power
control level
1. Remove the faceplate and overlay if they
are on the telephone base. Then, press the
recessed
PROGRAM
key.
2. Press
01
and you hear 3 beeps. Then, press
a dialing key
• 1
(low - coverage of 25% of maximum
working distance),
• 2
(middle - coverage of 50% maximum
working distance) or
• 3
(high - coverage of 100% of maximum
working distance),
to select the desired RF transmission power
control level. You hear 3 rising beeps as
confirmation.
Hold
The call on hold timeout duration can be
programmed from 1 to 99 minutes. Select
00
to disable the auto-release feature on call on
hold.
To change the call on hold timeout
duration
1. Remove the faceplate and overlay if they
are on the telephone base. Then, press the
recessed
PROGRAM
key.
2. Press
02
and you hear 3 beeps. Then, press
the dialing keys to select a timeout duration,
from
00
to
99
minutes. You hear 3 rising beeps
as confirmation.
Voicemail voltage detection
There are several voicemail voltage detection
methods on the telephone base that can be
programmed.
To change the voicemail voltage detection
by the steady high voltage, periodic high
voltage pulse and periodic low voltage
pulse detection method
1. Remove the faceplate and overlay if they
are on the telephone base. Then, press the
recessed
PROGRAM
key.
2. Press
10
and you hear 3 beeps. Then, press
a dialing key,
0
(disable) or
1
(enable), to select
the desired setting. You hear 3 rising beeps as
confirmation.
To change the voicemail voltage detection
by the line reversal method
1. Remove the faceplate and overlay if they
are on the telephone base. Then press the
recessed
PROGRAM
key.
2. Press
11
and you hear 3 beeps. Then press
a dialing key,
0
(disable) or
1
(enable), to select
the desired setting. You hear 3 rising beeps as
confirmation.
Summary of Contents for A1100 Analog Classic Series
Page 71: ...EN 71 English...