VTech 80-540953, Parents' Manual, Page: 8 / 23

6
INSTRUCTIONS
BATTERY REMOVAL AND INSTALLATION
• Make sure the main unit is turned
OFF
.
• Locate the battery cover on the back of the unit.
Use a coin or screwdriver to loosen the screw.
Then, remove the cover.
• If used batteries are present, remove these
batteries from the unit by pulling up on one end
of each battery.
• Install 4 new AA (AM-3/LR6) batteries
following the diagram inside the battery box.
(For best performance, alkaline batteries or
fully charged Ni-MH rechargeable batteries are
recommended).
• Replace the battery cover and tighten the screw to secure.
WARNING
Adult assembly required for battery installation.
Keep batteries out of reach of children.
IMPORTANT: BATTERY INFORMATION
•
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be
used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.