VTech 6325-3 User Manual Download Page 29

Page: 29 / 77

Telephone operation

Intercom

Use the intercom feature for conversations between two

system handsets.

When the handset is in idle mode, press

MeNU/

SeLeCT

to enter the main menu.
Press

VOL

CID

to highlight

>Intercom

, then

press

MeNU

/SeLeCT

If you have a two-handset system, your handset

screen shows

Calling other handset

If you have more than two handsets, your screen

shows

INTerCOM TO:

. Use the dialing keys to enter

the destination handset number. Your handset screen

shows

Calling handset X

The destination handset rings and its screen shows

Other handset is

calling

handset X is calling

3. To answer the intercom call, press /

FLASh

or any of the dialing

keys (

TONe

) on the destination handset. Both handsets now

show

Intercom

To turn off the microphone during an intercom call, press

MUTe/

reMOVe

on the originating or destination handset. The handset screen shows

Muted

for a few seconds and

MUTE

appears until the mute function is

turned off. Press

MUTe/

reMOVe

again to resume the conversation.

To end the intercom call, press

OFF/

CLeAr

or place the handset in the

telephone base or charger. Both screens show

Intercom ended

Answer an incoming call during an intercom call

If you receive an incoming outside call during an intercom call, there will be

an alert tone.

To answer the call, press /

FLASh

. The intercom call ends automatically.

To end the intercom call without answering the incoming call, press

OFF/

CLeAr

The telephone continues to ring.

•

•
•

INTERCOM TO:

>Intercom
Ringers

You can cancel the intercom call before it is answered by pressing

OFF/

CLeAr

on your originating handset.
If the destination handset does not answer the intercom call within 100

seconds, is in the directory or call log, or is out of range, your originating

handset screen shows

Unable to call. Try again

and returns to idle mode.

You can use a maximum of five handsets at a time. Only two handsets can be

used on an intercom call and three other handsets for an outside call at a time.

•

Summary of Contents for 6325-3














































































Search results

Summary of Contents for 6325-3

Reviews:

Related manuals for 6325-3

Brands by name

Popular brands

VTech 6325-3, User Manual

Search results

Summary of Contents for 6325-3

Reviews:

Related manuals for 6325-3

Brands by name

Popular brands