www.vtechphones.com
3
�� The power
adapter is
intended to be
correctly oriented
in a vertical
or floor mount
position.
�� Use only the
power adapter
provided in this
package; using
any other power
adapter could
damage the
telephone.
Install the plug
end of the DSL
filter into the
wall jack. Then,
connect the
telephone line
cord between
the filter and the
telephone base.
��
Telephone base installation
To install the telephone base:
Step 1:
Install telephone line
Plug one end of the telephone line cord into the telephone line jack
on the back of the telephone base. Then plug the other end of the
cord into a telephone outlet. If you have DSL, you must install a
DSL filter between the IS6110 telephone base and the wall jack.
Contact your DSL provider for more information on DSL filters.
Step 2:
Install USB cable
Using the USB cable provided, connect one end into the port
labelled
located on the back of the telephone base. Connect
the other end into an available USB port on your computer.
Step 3:
Turn power on
Plug the telephone base power adapter into the power port
located on the back of the IS6110 telephone base and the other
end into an electrical outlet not controlled by a wall switch. This
turns the telephone base on. Do NOT interrupt the installation
process by unplugging the power adapter or by using the handset
until the
POWER
indicator light on the front of telephone base
is lit steadily.
Step 4:
Check diagnostic lights
The
POWER
light should be lit to indicate the power is on.
Installation
Computer
Wall jack
Electrical
outlet
Telephone
base
USB cable
Telephone
line cord
Telephone base
power adapter
Telephone base
(front view)
DSL filter
(not included)
