VTech 552303, Instruction Manual, Page: 5 / 13

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned OFF .
2. Locate the battery cover on the back
of the unit. Use a screwdriver to loosen
the screw. Then, remove the cover.
3. If used batteries are present, remove
these batteries from the unit by
pulling up on one end of each battery.
4. Install 3 new ‘AA’ (LR6/AM-3)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance).
5. Replace the battery cover and tighten
the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.