background image

7

Setup

Getting Started

IMPORTANT:

1.  Do not dispose of a battery pack in a fire, the cell may explode.
2.  Do not open or mutilate the battery pack. Toxic substances may be released

causing harm to eyes or skin.

3.  Exercise care in hardling battery packs in order to prevent an accidental short

of the charge contacts, potentially causing the battery pack to overheat.

4.  Do not dispose of this battery pack into household garbage. Please refer to

the information concerning proper battery recycling.

Connecting to Phone Line
Plug one end of the telephone line cord into the TEL. LINE jack on the back of the
Base Unit. Plug the other end of this cord into the wall jack.
The AUX jack can be used for connection to an answering device, fax or computer
modem.

Checking for Dial Tone

From Cordless Handset
After  the  battery is  charged,  press  PHONE  on  the Handset.  PHONE  ON will
 appear on the Handset display, and you will hear dial tone.  If not, see In Case
of Difficulty.

From Base
Pick   up   the   corded   Handset   or   press   the   SPEAKER   key. PHONE   or
SPEAKERPHONE will appear on the Base display, and you will hear dial tone. If
not, see In Case of Difficulty.

Tone/Pulse  Selection

Your VT2498 is preset for tone dialing.
See Base Menu - Setting Dial Mode for details.

 CAUTION:

Use only the Vtech power supply provided with your telephone.

IMPORTANT:

FOR MAXIMUM PERFORMENCE OF YOUR
CORDLESS TELEPHONE SYSTEM:

1. Choose a central location for your Base Unit.
2. Install your Base Unit and Extension Handset

away from electronic equipment, such as personal
computers, television sets and microwave ovens.

3. In locations where there are multiple cordless

telephones, separate base units as much as
possible.

4. Install your telephone equipment away  from

heat sources and sunlight.

5. Avoid excessive moisture, dust or extreme cold.

2498-manual-output.p65

3/6/03, 9:33 AM

7

Summary of Contents for 2498












































Reviews: