VTech 2 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone User Manual Download Page 25

Page: 25 / 76

Intercom

Use the intercom feature for conversations between two handsets.

Press

INT

on your handset when not in use.

If you have two handsets, your handset shows

CALLING OTHER HANDSET

If you have three or more handsets, your handset

shows

INTERCOM TO:

Use the dialing keys to select a

destination handset. Your handset shows

CALLING HANDSET X

The destination handset rings and its screen shows

OTHER HANDSET IS CALLING

when you have two

handsets, or

HANDSET X IS CALLING

when you have

three or more handsets.
To answer the intercom call, press

FLASH

, ,

INT

or any dialing key (

TONE

) on the destination

handset. Both handsets now show

INTERCOM

To end an intercom call, press

OFF/

CANCEL

or place the

handset back in the telephone base or charger. Both handsets now show

INTERCOM ENDED

•

You can cancel the intercom call before it is answered by pressing

OFF/

CANCEL

INT

on the originating handset.

If the destination handset does not answer the intercom call within 100

seconds, is in the directory or call log, or is out of range, the originating

handset shows

UNABLE TO CALL. TRY AGAIN

and returns to

idle mode.
Press

OFF/

CANCEL

MUTE/

DELETE

on the destination handset to

temporarily silence the intercom ringer.
You can use two pairs of handsets on two intercom calls at a time. When

two pairs of handsets are used on intercom calls, use the fifth handset for an

outside call.
If there is an incoming call while the originating handset shows

INTERCOM TO:

, the intercom request will be stopped and the screen will

show

INCOMING CALL

•

You can cancel the intercom call before it is answered by pressing

OFF/

CANCEL

INT

on the originating handset.

If the destination handset does not answer the intercom call within 100

seconds, is in the directory or call log, or is out of range, the originating

handset shows

UNABLE TO CALL. TRY AGAIN

and returns to

idle mode.
Press

OFF/

CANCEL

MUTE/

DELETE

on the destination handset to

temporarily silence the intercom ringer.
You can use two pairs of handsets on two intercom calls at a time. When

two pairs of handsets are used on intercom calls, use the fifth handset for an

outside call.
If there is an incoming call while the originating handset shows

INTERCOM TO:

, the intercom request will be stopped and the screen will

show

INCOMING CALL

•

Telephone operation

CALLING

OTHER HANDSET

IS CALLING

INTERCOM

Summary of Contents for 2 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone













































































Search results

Summary of Contents for 2 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone

Reviews:

Related manuals for 2 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone

Brands by name

Popular brands

VTech 2 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone, User Manual

Search results

Summary of Contents for 2 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone

Reviews:

Related manuals for 2 Handset DECT 6.0 Expandable Cordless Telephone with Answering System & Handset Speakerphone

Brands by name

Popular brands