VTech 15200 User Guidance Download Page 73

Page: 73 / 97

CHANGE PIN

Press

MENU

when the phone is not in use. And then

press

to scroll to

ANS. MACHINE

Press

and

to scroll to

TAM SETTINGS

Press

and

to scroll to

CHANGE PIN

Press

and enter the old system PIN (default:

0000

Press

and enter the new system PIN.

Press

and enter the new system PIN again.

Press

to conirm. You hear a conirmation tone.

CALL sCREENING

To screen a call at the telephone base:

If the answering system and call screening are on
(see

CALL SCREENING SETTING

on page 7), the

announcement and the incoming message broadcast
at the telephone base while the call is answered by the
answering system.

Options while a message is being recorded:

Press

VOL+

VOL-

to adjust the call screening

volume.

To screen a call at a handset:

If the answering system is on and your answering
system is recording a message, the handset displays

SCREENING ?

. Press

to screen the call on your

handset.

.
3.
.

5.
6.
7.

•

Summary of Contents for 15200


































































































Search results

Summary of Contents for 15200

Reviews:

VTech 15200, User Guidance, Page: 73 / 97

Search results

Summary of Contents for 15200

Reviews: