Instructions & Activities
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned
OFF
.
. Locate the battery cover on the spine of
the book. Use a screwdriver to loosen
the screw.
3. Install new “AAA” (AM-/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance;
• Non-rechargeable batteries are not to be recharged;
• Rechargeable batteries are to be removed from the toy before
being charged (if removable);
• Rechargeable batteries are only to be charged under adult
supervision (if removable);
• Different types of batteries or new and used batteries are not to
be mixed;
• Only batteries of the same or equivalent type as recommended
are to be used;
• Batteries are to be inserted with the correct polarity;
• Exhausted batteries are to be removed from the toy;
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than recommended number
of power supplies.
0813 MANUAL.indd
008-3- 1::0