VTech Baby Drive & Discover Baby Keys, Parents' Manual

Page: 5 / 13

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned
OFF.
2. Locate the battery cover on the bottom of
the unit.
3. Use a screwdriver to loosen the screw.
4. Install 3 new LR44 button cell batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
5. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries or fully charged NI-MH (Nickel Metal-
hydride)
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.