13
2. Locate the four T-ends (A, B, C, D) of the straps and insert them
through the holes of the booster, as shown below. Pull back to
make sure they are secure.
PRODUCT SET-UP
A. Seat Attachment
Before attaching this product to an adult chair, make sure the chair
meets the dimensions shown above.
•
Place the booster seat on the chair.
•
Wrap the bottom straps around the bottom of the chair. Buckle
the straps. You will hear a “click” sound to indicate the straps are
secure. Pull the free end of the strap to tighten.
•
Wrap the back straps around the back of the chair. Buckle the
straps. You will hear a “click” sound to indicate the straps are
secure. Pull the free end of the strap to tighten.
•
Check the restraint system is securely attached by pulling it away
from the chair. The restraint system should remain firmly attached.
(Min 440mm)
Min 17.3in
Min 7.4in
(Min 188mm)
Min 16.6in
(Min 423mm)
