background image

Propiedad de Vendwatch Telematics - Con

fi

dencial 

THE BEHAVIOUR OF THE POWER LED 

STATE

 

ILLUMINATION

 

DESCRIPTION

 

On 

Solid Green 

VM is powered on AND the device is connected to MDB 

Off 

Off 

VM is powered off OR the device is disconnected from the MDB; if the Telemetry or 
Status LED are illuminated solid or blinking, it is running on battery. 

THE  BEHAVIOUR OF  THE TELEMETRY LED 

STATE

 

ILLUMINATION

 

DESCRIPTION

 

Radio On 

Solid Green 

Power was applied to the Telemetry module 

Radio Off 

Off 

Power was removed from the Telemetry module 

Radio Training 

Green, On 50% 

Radio is searching for available networks 

Radio Connected 

Green, On 87% 

Radio is connected to selected network 

THE BEHAVIOUR OF THE STATUS LED 

STATE

 

ILLUMINATION

 

DESCRIPTION

 

Off 

Off 

The device is off 

Booting Up 

Green, On 50% 

The device is getting up to the normal state 

Normal 

Green, Solid 

The device is in normal state 

Programing 

Purple, Blinking 50% 

The device is being programmed 

Alert 

Orange, Solid 

The device has detected issues 

Handheld 

Blue, Solid 

The device is connected to VM Guide/Care 

Battery 

Red, Blinking 50% 

The device is running on battery 

Re

fi

ll 

White, Blinking 50% 

The device is reading DEX 

Mfg Testing 

Purple, Blinking 50% 

The device is running manufacturing test 

Summary of Contents for VendMine Connect T313

























Reviews: