- 4 -
Getting Started
Inserting a Memory Card
Insert the memory card into the card slot until it clicks. To remove the memory card, push
to eject the memory card out of the slot.
Power On/Off
The dash cam will automatically power on/off once the ignition switch is on/off when you
completed the correct installation.
NOTE:
•
Make sure to insert the memory card in the right
direction.
•
Do not remove or insert the memory card when the device
is being powered on. This may damage the memory card.
•
Please use a high-speed micro SD card with CLASS
⑩
•
Please format cards before use and anytime a significant
amount of data has been collected to ensure that the
device and SD cards are working properly together.
Video Recording
Normal Video Mode
It starts video recording automatically when power on and the TF card is inserted. Stop
recording automatically when power off.
Emergency Video Mode
•
G-Sensor Event Recording: It will automatically activate emergency recording mode
when detecting a collision. The LED indicator of wired remote will flash quickly. It will
save video files named ‘’GSR 001 002 003….’’
•
Manual Event Recording: Press the emergency button of wired remote during the
recording to manually activate emergency recording mode. The LED indicator of wired
remote will flash quickly. It will save video files named ‘’KEY 001 002 003….’’
Video file name information:
REC_220609-163256F.TS
“REC”
means normal video file
“GSR”
means file recorded by triggering G-sensor
“KEY”
means file recorded by pressing controller
“220609”
means date June 9, 2022
“163256”
means time 16 o’clock 32 minutes 56 seconds
“F”
means front camera video file
NOTE:
1) You cannot record video without a micro SD card inserted.
2) Video files recorded in emergency mode are protected from being overwritten(Maximum 10).
