background image

VSPHOENIX S MANUAL    41

OTHER METHODS

OTHER METHODS

40    VSPHOENIX S MANUAL

Segment Management Methods

Daily management 

Orders of Regular Scheduled Inspection

1. The tip being stuck on the segment will be expanded as time goes by. As the tips are expanding, the segment also will be expanded. 
    The expanded segment can be stuck on the spider (frame) and this may cause an error. 

2. If above situation continues, the response of segment will be worse and the dart will be hard to remove. Also, the expanded 

segment due to the remaining and broken tips will make the hole near the plugged area smaller. Thus, throwing darts cannot be sticking.

3. In results, an athletic performance of player will be lowered since the points without regard to the throwing toward whatever the target,
    will be reflected.

Back Board

Sensing PCB
Cable

Segment

Sensing Rubber

In case of the tip is broken and remaining

In case of the tip is broken and stuck

The segment influences the dart game to the most. Since the condition of segment, whether it’s good or bad effects the 
players’ satisfactions and their images, you need to do manage the daily and inspection regularly.

!

VSPHOENIX S target has a cover on the back so even if you push the tip into the target, the broken tips will be gathered
inside the target due to it is designed to reduce target errors.

!

Nippers

Remover

※ 

The target segment can be broke if you push in too hard. 

     Please be careful when pulling them.

1. Open the door of the back of VSPHOENIX S and disconnect the sensing PCB cables.
2. Disassemble the back board by loosening the 4 of fly nuts.
3. After disassembling the back board, disassemble the sensing PCB, 
    sensing rubber and segment
4. If the sensing rubber is worn out, change them with new one.
5. Remove the tips sticking on disassembled segment.
6. After the inspection, assemble them by opposite order.
7. Go into the SETUP MODE and test the sensor at the HARDWARE TEST
   of EASY SETUP. Check if all things are working properly.

Sensing PCB

Fly nut
/ Washer

Use washer when you tighten fly nuts.

!

Fly nut

Washer

Summary of Contents for VSPHOENIX S



























Reviews: