ECU Converter HORNET Version: 1.1
Page 1/18
ECU converter HORNET
Manual Version 1.1
Introduction
The VSpeak ECU Converter for HORNET ECUs is emulating the IO-BOARD and the
TERMINAL. Data, which is shown on the STATUS DISPLAYs of the TERMINAL can be
sent via telemetry to the radio. To avoid unwanted electrical effects between the ECU and RC-
system the VSpeak ECU Converter is galvanically isolated via optocouplers.
The ECU Converter can interpret and transmit data from the HORNET III and older
HORNET II ECU.
The VSpeak ECU Converter can be software-updated by the user.
The current version has been tested with the following ECUs/Versions:
HORNET II V7.1B
HORNET III V2.5A
60 mm
22 mm
12 mm
