5
INSTALLING BATTERIES
To properly install batteries into your mouse, please follow the instructions below:
1. Remove the battery compartment cover from your mouse.
2. Install two AAA batteries into the battery compartment following the orientation guide in the
battery bay.
3. Replace the battery compartment cover back onto your mouse until it locks securely.
INSTALLATION
For All Operating Systems
1. Make sure you have successfully installed the batteries into your mouse. Refer to the
Installing Batteries section in this manual if necessary.
2. Pull out the Nano Receiver stowed in the bottom of your mouse.
3. Turn on your computer and plug the Nano Receiver into an available USB port on your
computer. (If you are not able to find a USB port on your computer, please refer to the user
manual of your computer for more detail.) Your wireless optical mouse is now ready!
