2. When the appliance is switched off, place the appliance onto the
recharging/storage stand or plug the adaptor directly into the
base of the trimmer.
3. Switch the adaptor on and the green LED charging light on the
trimmer will illuminate to indicate that the adaptor is correctly
inserted into the trimmer and connected to the mains power
supply.
4. A 16 hour full charge will provide 30 minutes usage time.
INSERTING THE ADAPTOR CORD INTO THE STAND
1. Remove the trimmer, attachments and accessories from the
stand.
2. Hold the recharging/storage stand upside down.
3. Insert the adaptor plug into the hole on the base of the stand
and push firmly into position.
4. Route the cord through the channel on the base of the stand.
5. Place your thumb on the hinged back cover and push the cover
over the adaptor plug (to the right) to secure the cord and plug
in place.
CORDED USE – OPERATION WITH POWER CORD
1. Remove the AC power adaptor from the recharging/storage
stand. To do this, turn the base over to the underside with the
cord facing you. Using your thumb, push the hinged back cover
to the left until it pivots clear of the inserted plug adaptor. Pull
the plug upwards and remove from the base.
2. Plug the AC power adaptor directly into the base of the
trimmer.
3. Plug the AC power adaptor into a 100v – 240v power supply.
Switch the power on, and the trimmer can now be used in cored
operation.
