VS 21831, Operating Instructions Manual, Page: 44 / 64

44
4.2 Saved positions
- Memory and memory display handswitch:
Saving positions 1 and 2
On the right-hand side of the handswitches [Figure 1] , there is a
“Save” button (1) which is indicated by a star .
- Move the desktop to a position you like to use and press the star
button
(1) for 2 seconds. On the memory handswitch, the LED (2)
flashes; on the memory display handswitch [Figure 2] , the light strip
(3) flashes twice to indicate that the position is being memorised.
- Memory display handswitch only [Figure 2] : The display indicates
the saved position with a star and the position number. The number
next to the star corresponds to the sequence in which the positions
were saved. First position saved: A star with a “1” next to it
(4) .
In this way, the positions “1” and “2” are saved.
- If the user moves the desktop to a different position and then saves
this position, this position overwrites the saved position closest to
the current position.
-
Additional function of the memory display handswitch [Figure 2]:
Saving positions 3 and 4
The handswitch can be used to save four positions. If you press the
star button
(1) briefly, the display indicates one of the four saved
positions. You can repeatedly briefly press the star button (1) to
switch between the four saved positions and choose the number
under which the current position is to be saved. For example, the
user wants to save the current position as position 3: Keep pressing
and releasing the star button until the “star” appears in the display
with “3” next to it. Now repeat the same memory operation as
described above: Press the star for 2 seconds to save the position.
1 2
(1) (1) (4)
(2)
(3)