XPERT BEARD / TOOL TIPS
9
MAINS OPERATION
This trimmer can also be used in corded mains powered operation.
• Ensure the appliance is switched off.
• Connect the adaptor to the base of the appliance and plug the adaptor into a
suitable mains socket.
• The blue LED will flashing when the adaptor is correctly inserted into the
appliance and connected to the mains.
• The appliance is now ready for use.
NOTE:
The appliance should not be used for longer than 20 minutes when
operated from the mains.
USING THE LENGTH CONTROL DIAL
The length control dial allows you to adjust the comb guide to change the cutting
length of your trimmer. You’ll need to experiment to find your preferred length,
but as a guide:
1-3mm:
smart stubble
4-6mm:
short designer beard
7-9mm:
mid-length beard
10-12mm:
long, lived in beard
• Select a cutting length (1-12mm) using the dial on the front of the trimmer.
Turning the dial clockwise will increase the cutting length.
Turning it anti-clockwise will decrease the cutting length.
• Once you have selected your desired cutting length, the guide automatically
locks into position for a guaranteed, even cut.
• Switch the trimmer on by sliding the power button up, the blades will start to
move & you can begin trimming.
