WET & DRY STRAIGHTENER
10
OPERATING INSTRUCTIONS
Wash, condition & towel dry your hair so that it is damp or simply
straighten on already clean & dry hair.
NOTE:
Do not use on dripping wet hair.
Ensure your hair is combed through & tangle-free.
1. Plug your straightener into a 230-240V~ suitable power outlet.
2. Place your straightener on a heat protective, flat level surface.
3. Press and hold the ‘ ’ button for 1 - 2 seconds to turn your
straightener on.
4. The default 230°C temperature setting will light up & start to flash.
5. Press the ‘ ’ button to adjust to your desired temperature, cycling
through 230°C - 170°C - 190°C - 210°C. The LED heat setting
indicator will become solid once the selected temperature has
been reached.
6. After the first 5 seconds of being switched on, the ‘ ’ button
will automatically lock. To adjust any settings, press the
‘ ’ button twice quickly, deactivating the lock mode. To change
temperatures, simple press the ‘ ’ button
7. Divide your hair into 4 sections (2 back & 2 front).
8. Starting with the back sections at the nape of the neck, take a
horizontal section no wider than the plate of the straightener &
clamp the plates over the section then glide down slowly & evenly.
9. Repeat this through all sections.
10. After use turn your straightener off by pressing and holding the
‘ ’ button for 1 - 2 seconds.
Allow straightener to cool before storing.
Summary of Contents for VSS992A
Page 3: ...3 WET DRY STRAIGHTENER ...
Page 18: ...WET DRY STRAIGHTENER 18 ...
