XPERT GROOM / TOOL TIPS
7
PREPPING YOUR
NEW TOOL
CHARGING
The XPERT GROOM is so easy to use. But before you start using your new tool, you must
take the time to charge it for
3 hours
before its first use. Your new tool comes with
a small amount of charge, but the initial charge will ensure your new tool will have
optimum power performance to give you smooth fast cutting, every time.
- Before using for the first time, fully charge your new tool continuously for 3 hours.
After the first charge a full charge will only take 120 minutes.
- Maximum battery capacity will only be reached after 3 charging & discharging cycles.
- To charge the trimmer, insert the small plug on the charging adaptor into the hole on
the base of the trimmer.
- When charging the trimmer, the blue LED charging light will flash slowly &
continuously until the battery has fully charged, then the blue LED charging light
will stop flashing but remain on.
- 2 hours full charge will supply 120 minutes cordless runtime.
- A quick charge of 20 minutes provides 20 minutes cordless runtime.
- To maintain optimum capacity of the rechargeable battery, it is highly recommended
to fully discharge & then recharge your tool for 3 hours every 6 months.
- When the trimmer is running low on charge, the blue LED indicator light will flash.
This indicates that the trimmer needs to be recharged, however it may continue to run
for a very short while after
- lf the blue LED suddenly starts to flash rapidly then the appliance is faulty.
lf this happens then please stop charging & remove the adaptor from the mains &
contact our customer care centre for further advise (see the “warranty section”
section of the information booklet).
