THE CREW CUT / TOOL TIPS
10
IMPORTANT
Do not attempt to trim hair close to your ears with this clipper. Never allow ears
to enter the ring of the clipper blade. A separate trimmer has been provided to
trim around the ears, the neckline and sideburns.
SELECTING A CUTTING LENGTH
The Crew Cut comes with 1 lock-in comb guide that adjusts to 4 different cutting
lengths.
GRADE #1
3mm
GRADE #2
6mm
GRADE #3
9.5mm
GRADE #4
13mm
ATTACHING THE COMB GUIDE
To attach the comb guide, make sure the clipper is switched off. While holding
the clipper with the blades facing upwards, place the comb guide over the top of
the clipper with the teeth of the comb facing upwards. Release the comb guide
locking mechanism, located on the side of the clipper (fig.5), by sliding it away
from the comb guide. Line up position A on the comb guide (fig.1) with position B
on the clipper (fig.2) then gently rotate the comb guide in a clockwise direction
until it clicks into place. Make sure that the locking mechanism is in the locked
position and the comb guide is securely in place before using the clipper.
Fig. 4
Fig. 5
Fig. 6
Fig. 1
Fig. 2
Fig. 3
A
B
