THE BEARD SHAPER / TOOL TIPS
7
PREPPING YOUR
NEW TOOL
CHARGING
The Beard Shaper is so easy to use. But before you start using your new tool, you
must take the time to charge it overnight for
16 hours
before its first use. Your
new tool comes with a small amount of charge, but the initial charge will ensure
your new tool will have optimum power performance to give you smooth fast
cutting, every time.
- Before using for the first time, fully charge your new tool continuously for16
hours.
- Maximum battery capacity will only be reached after 3 charging &
discharging cycles.
- Ensure your new tool is switched off.
- Insert the small plug on the charging adaptor into the socket on the bottom
of your new tool.
- Plug the charging adaptor into a suitable mains power socket and switch on.
If the battery is very weak, wait about 1 minute.
- The red charging LED indictor light on your new tool will light up when
correctly connected to the mains power. When it is fully charged, the red
charging LED indicator light will remain on.
- A full charge will supply 30 minutes cordless runtime.
- To maintain optimum capacity of the rechargeable battery, it is highly
recommended to fully discharge & then recharge your tool for 16 hours every
3 months.
