STYLE MULTI CURL
12
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free.
Plug your styler into a 240V~ suitable power outlet & place on a
heat protective, flat level surface.
Turn your styler on by sliding the on/off switch to “I”.
CURL
using either the 16mm or 25mm barrel attachments
1. Divide your hair into equal sections & comb each before curling.
2. Press down on the clamp lever & place the curling barrel half
way up the section of hair distributing the hair evenly between
the clamp & barrel then gently pull the styler down to the tips
of your hair.
3. Wind the section as far as you want curled (being careful not
to let the curling tong touch the scalp). Hold in place for a few
seconds depending on length of your hair.
4. Unwind once the hair is warm (not hot) to the touch by pressing
down on the clamp lever to release your hair.
5. Repeat this through all desired sections.
TEXTURE & VOLUME
using the brush sleeve attachment
& 16mm barrel
1. Place the brush at the roots of the section & gently pull towards
the end of the tips. Alternatively roll a section of hair around the
brush & hold for 5-10secs.
NB:
On longer styles, be careful not to overlay the hair around the
barrel as this may cause tangling.
Summary of Contents for VSC2021WA
