THE TRIM & GROOM / TOOL TIPS
9
SELECTING A CUTTING LENGTH
The Trim & Groom comes with 1 comb guide with 18 positions (1mm to 18mm) for
crafting all types of beard and s an integrated grooved dial that adjusts
the trimming settings in 1mm steps. Simply turn the dial left to right / right to
left to your desired cutting length setting.
The cutting lengths are displayed on the LED screen in ‘mm’. The length setting
on the LED screen will change as you adjust the dial.
GOOD TO NOTE:
Always put the comb guide on BEFORE turning the trimmer on,
and turn the trimmer off before removing it.
To remove the cutting guide, first adjust the cutting length to maximum (18 mm).
With the trimmer switched off, slowly pull the comb guide upwards and away
from the trimmer body to remove.
To replace the cutting guide, first adjust the cutting length to minimum (1 mm).
With the trimmer switched off, clip on one side and then the other side of the
comb guide.
Use the grooved dial to select the desired cutting length.
