VS Sassoon THE GROOM CAPTAIN, Tool Tips, Page: 13 / 28

THE GROOM CAPTAIN / TOOL TIPS
13
4. Select the required cutting length setting (1-3.5 mm). If you require more than one
cutting length, start with the longest length first.
5. Switch the trimmer on.
6. Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat against
the skin.
7. Move the trimmer upwards and outward through the hair, against the direction of
hair growth.
8. The trimmer will work most efficiently when cutting through hair at its own speed.
9. To remove the 6 position short beard & stubble comb guide, gently lift the guide
off the head by lifting the rear section.
USING THE 34MM TRIMMING BLADE WITH THE 3
BEARD COMB GUIDES
1. Attach the comb guide as shown in ATTACHING THE COMB GUIDES TO THE TRIMMER
section.
2. The beard combs guides come in 3 different length settings: I = 5 mm, II = 7 mm
and III = 9 mm.
3. If you require more than one cutting length, start with the longest length first
(7mm).
4. Switch the trimmer on.
5. Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat against
the skin.
6. Move the trimmer upwards and outward through the hair you wish to blend.
7. To blend-in a shorter length use a smaller beard comb and use in the same way
as above.
8. The trimmer will work most efficiently when cutting through hair at its own speed.
9. To remove beard comb guide, lift the rear of the guide upward and away from the
34mm trimming blade head.