THE ESSENTIAL CUT / TOOL TIPS
8
HOW TO USE
THE ESSENTIAL CUT
BEFORE USING
• Always inspect the clipper blades for noticeable signs of damage.
• Ensure the clipper blades are well oiled before using.
• Always inspect the clipper blades before use to ensure they are free from
hair, debris etc.
• Ensure the clipper is sufficiently charged before use.
• For best performance use on clean, dry hair that has been combed until
tangle-free.
OILING THE BLADES
To get the sharpest, most precise cut, it is highly recommended to oil the blades
before each use.
Using the oil supplied with your new tool, unscrew the cap & cut off the very end
of the plastic tube with a pair of scissors to release the oil.
Switch your tool on, gently squeeze the oil tube & apply 2 drops of oil onto the
blades. Leave the tool on for a further few seconds to allow the oil to thoroughly
spread across each of the blades. Switch off the tool & remove any excess oil by
gently dabbing with a cloth.
5 POSITION TAPER CONTROL
The 5 position taper control for is designed for blending layers & a precise close
trim, everytime.
• To increase the cutting length, push the lever down.
• To reduce the cutting length, push the lever up.
