THE CRAFTED TRIM / TOOL TIPS
9
SELECTING A CUTTING LENGTH
Your Crafted Trim comes with 1 comb guide with 30 positions (0.5mm to 15mm)
for crafting a short stubble look, or keeping your beard in top shape and an
integrated grooved wheel control that adjusts the trimming settings in 0.5mm
steps. Simply turn the wheel up and down to your desired cutting length setting.
GOOD TO NOTE:
Always put the comb guide on BEFORE turning the trimmer
on, and turn the trimmer off before removing it.
To remove the comb guide, set the comb guide so its aligned with the
triangle mark (Fig. 1). With the trimmer switched off, pull the comb
guide up to remove it.
To replace the comb guide, set the comb guide to the triangle mark
(Fig. 1). With the trimmer switched off, press the comb guide down
then turn the dial to put it on.
FOR TRIMMING STUBBLE & SHORT BEARDS
The comb guide of your Crafted Trim comes with a special detachable
short beard guide. It is specially designed for trimming stubble
short beards (positions 0.5mm to 6mm) and ensures an even more
accurate cut.
Beyond 6mm, it is recommended to shift the short beard guide to
the back of your trimmer in order to maintain an effective cutting
performance.
To unlock the short beard guide, carefully push the buttons (Fig. 2)
on both sides of the comb guide using your thumb and index finger.
Lift the short beard guide
up and make it swivel through a 180° angle until it reaches the back
of the appliance (Fig. 3).
To put the short beard guide back, unlock it then fold it back over the
front of the appliance, until you hear a clicks into place.
Fig.1
Fig.2
Fig.3
