VS Sassoon SHINE LUSTRE WONDERFUL WAVES, Instruction Booklet

Page: 10 / 20

SHINE LUSTRE WONDERFUL WAVES
10
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free.
1. Plug your waver into a 230-240V~ suitable power outlet, fold
out the built-in kick stand & place on a heat protective, flat level
surface.
2. Press & hold the
( )
button for approx. 2 seconds to turn your
waver on. At this time it will start to automatically heat to the
default temperature setting of 160°C.
3. To adjust the heat settings, press the ( )
button & scroll through
to the desired temperature. The LED light will illuminate & flash
to indicate the heat setting that’s selected. The LED light will
continue to flash until the desired temperature has been reached.
NB:
At this stage the universal heat glove should be worn on the
hand which will hold the hair in the waver.
4. Divide your hair into equal sections, between 3cm - 5cm wide,
depending on your hair type, thickness & length. The number of
sections will depend on how much hair you have & how defined
you’d like your waves to be.
5. Place the section of hair between the top plate/barrel & bottom
barrels & hold the hair firmly for approx 5-10 seconds, depending
on your hair type, thickness & length, as well as how defined you’d
like the waves to be. Take care not to let the appliance touch the
scalp.
6. Release the section of hair & re-position the waver so that the
next wave section to be styled falls in line with the previous wave
section already styled.
7. Always work from the root to the tips of your hair. Continue this
action down the entire hair section, towards the ends of the hair.