SALON CERAMIC
11
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free.
1. Plug your straightener into a suitable power outlet.
2. Place your straightener on a heat protective, flat level surface.
3.
Press the ‘I/O’ button to turn your straightener on. The
temperature display will illuminate & the straightener will default
to 205°C as the care setting for most hair types.
4. To adjust the heat setting hold down the ‘+’ or ‘-’ button for 2
seconds & switch between the ‘+’ & ‘-’ buttons until desired heat
setting is selected.
5. The red temperature lights will flick on and off to the selected
temperature to indicate the straightener is heating. Once the
temperature is reached they will remain solid in colour.
6. Divide your hair into 4 sections (2 back & 2 front).
7. Starting with the back sections at the nape of the neck , take
a horizontal section no wider than the plate of the straightener
& clamp the plates over the section then glide down slowly &
evenly.
8. Repeat this through all sections.
9. After use, turn your straightener off by pressing the ‘I/O’ button
for 1 second until the red LED light turns off.
Allow straightener to cool before storing.
Summary of Contents for SALON CERAMIC VSS2514A
Page 3: ...SALON CERAMIC 3...
Page 20: ...IB 18 178B SEE BE...
