LUMINOUS STRAIGHT STYLES
10
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free.
1.
Plug your straightener into a 100-120V~, 220-240V~ suitable
power outlet & place on a heat protective, flat level surface.
2. Press the “I/0” button and it will start to heat to the default heat
setting of 170°C. Adjust heat settings using the “+” & “-”.
3. Divide your hair into 4 sections (2 back & 2 front).
4. Starting with the back sections at the nape of the neck, take a
horizontal section no wider than the plates of the straightener
& clamp the plates over the section then glide down slowly &
evenly.
5. Repeat this through all sections.
6. After use, turn your straightener off by pressing the “I/O” button.
When power is off, the red LED light will no longer be illuminated.
Allow straightener to cool before storing.
