CLEANING AND MAINTENANCE
For easy cleaning, the blades on your VS For Men clipper are
removable. Regular cleaning will maintain their high performance
level.To clean proceed as follows:
• Switch the appliance off and unplug at the mains supply.
• Remove any comb guides. Rinse the comb guide under running
water and dry thoroughly before storage or use.
• Remove the blades carefully noting which way round they are
fitted. This will help with re-assembling.
• Remove the two screws from the large fixed blade and detach
this blade.
• Now brush away the hair and other debris from the interior of the
cutting head and blades.
• Re-assembly is simply the reverse of the above instructions.
• Finally, before fully tightening the two screws in the large blade,
to avoid injury ensure that the blades are correctly aligned. With
the taper control lever fully forward, the tips of the small blade
must be parallel with and 1mm below the tips of the large blade.
Also check that the extreme left hand tooth of the small blade is
inside the large blade. (Failure to do so could cause injury).
• Carefully tighten the two screws in the big blade, taking care not
to disturb the above correct position of the blades.
NOTE: Do not attempt to repair or replace the blades. In the event
that the blades become blunt or damaged, contact the Conair
CustomerCare Line (Conair Customer Service).
Summary of Contents for LITHIUM-PRO CERAMIC VSM7474A
Page 1: ...Model VSM7474A LITHIUM PRO CERAMIC...
Page 14: ......