VS Sassoon KERATIN PROTECT BIG CURLS, Instruction Booklet

Page: 10 / 20

KERATIN PROTECT BIG CURLS
10
OPERATING INSTRUCTIONS
Wash, condition & dry your hair as normal.
Ensure your hair is combed through & tangle-free.
1. Plug your curler into a 240~ suitable power outlet & place on a
heat protective, flat level surface.
2. Press the ‘I/O’ button to turn your curler on.
3. Press the ‘+’ or ‘-’ button to select the temperature for your
hair type.Once the temperature you have selected has been
reached, the LED light will stop flashing.
NB:
At this stage the universal heat glove should be worn on the
hand which will wrap the hair around the barrel.
4. Divide your hair into equal sections & comb sections once more
before curling.
5. Take a section of hair starting 5cm from the scalp & wind the hair
around the barrel until you reach the tips of your hair, ensuring
the tip of the curler is pointing downwards. Hold in place for a
few seconds depending on temperature & length of your hair.
6. Unwind the the section of hair once it is warm (not hot) to the
touch & pull the curler away.
7. Repeat this through all sections
8. After use, turn your curler off by pressing the ‘I/O’ button.
9. To “set” your curls, wait until your hair is completely cooled
before brushing or combing through.
Allow curler to cool before storing.